Lead Acid Battery Production Machinary Industry Pasting Machine
Product base introduction:
The PM-TB700 is a special production equipment for lead-acid
battery coating. Automatic flow hydration completes the functions
of grid supply, lead paste filling, pressure plate, acid leaching
and so on. It has the same performance characteristics as similar
imported equipment, reasonable structure, convenient operation,
good maintainability and high productivity. The surface of the
coated plate is flat and the weight error is controlled accurately
to ensure the consistency and stability of the coated plate.
1. Filling grid production efficiency: 40-80 pieces / min
2. Paste capacity: about 250Kg lead paste.
3. Grid filling range: long (390-700) × width (100-220) × thickness
4. Installed capacity: 15.6KW.
5. Host dimensions: length 3570 × width 1560 × height 1880mm
6. Equipment weight: about 3T
1. The equipment bearing adopts centralized lubrication system, the
lubrication of each bearing is gathered together, the lubrication
is convenient and effective, the bearing life is prolonged, and the
maintenance performance is good.
2. The fuselage grid is sent to the mechanism, the main board and
the acid dripping device are integrated, and the structure is
compact and the rigidity is good. Easy to adjust and flexible. The
leaching roller and the tail of the coating machine have a long
distance, which reduces the corrosion of the conveyor chain of the
surface dryer. The whole frame of the leaching acid watering
mechanism adopts all-stainless steel structure, avoiding acid
corrosion and improving the service life of the frame. The effect
of iron ions on the plates during the coating process is reduced.
3. The grid is sent to the mechanism with independent stepless
speed change, which has wider application range and better matching
speed. The vacuum is applied to the plate, and the grid is not
4. The paste bucket uses two straight grooved paste roller pastes,
and has a special device to adjust and control the amount of the
5. High-quality alloy roller scraper, with special heat treatment,
high hardness, excellent wear resistance, flat surface of the
coated plate, accurate weight error control, and consistency and
stability of the coated plate.
6. The tensioning, squeezing and squeezing of the coating belt are
pneumatically adjusted; all the key contact areas such as the drum
and the shaft are made of stainless steel and corrosion resistant.
Our other pasting machine specification:
|3828 x 1310 x 1950||16||2.3|
|3875 x 1350 x 1910||12||2.0|
|3350 x 1410 x 1915||17||2.5|
|3420 x 1560 x 1880||16||4.0|